Stancor Stand Alone 120 Volt Alarm Pak with Battery Backup (Indoor) on Stancor, Inc. Stancor, Inc. - Stancor Stand Alone 120 Volt Alarm Pak with Battery Backup (Indoor)
Stancor Pumps is a leading designer and manufacturer of Electric Submersible Pumps and Controls
Call: 203.268.7513office@stancorpumps.com
Search
All Categories > Pump Accessories > Stancor Stand Alone 120 Volt Alarm Pak with Battery Backup (Indoor) > Stancor Stand Alone 120 Volt Alarm Pak with Battery Backup (Indoor)  
    Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Request Information

Stancor Stand Alone 120 Volt Alarm Pak with Battery Backup (Indoor)



    Download PDF Download PDF  
    Email Email This Page  
    Save To Favorites Save To Favorites
  


The Stancor battery backup alarm system is designed to monitor liquid levels in sump basins, holding tanks, lift stations tanks and many other non-potable water and wastewater applications. It is designed to sound an audible horn and illuminate a red light to notify of an alarm situation. There is a green line voltage power indicator light to show that the unit is functioning, as well as a silence switch to turn horn off while fixing the alarm (the red alarm light will remain on until the alarm conditions are remedied).

STANCOR-STAND-ALONE-120-VOLT-ALARM-PAK-BATTERY

larger image

STANCOR-STAND-ALONE-120-VOLT-ALARM-PAK-BATTERY-CABLE

larger image


 Specifications  

Primary Voltage

120 VAC, 60 Hz

Secondary Voltage

12 VDC 60 Hz 6 watts max.

Enclosure

NEMA 1 Thermoplastic enclosure with external mounting feet
6" x 3.75" x 2.50"

Alarm Horn

85 Decibels at 10 feet

Power Cable

6 feet 120 VAC (NEMA 5-15P)

Battery Backup

9 V Battery

Auxiliary Contacts

120 VAC, 5 AMP Max. 60 Hz

Features

  • Red "Alarm On" Light
  • Alarm test and horn silence button with auto reset
  • Low voltage screw terminals
  • Class 2 Output, 12 VDC, connect ONLY the float switch -or- alarm device leads to the low voltage terminals.
  • *DO NOT APPLY ELECTRICAL POWER
  • NEMA 1 Thermoplastic enclosure with external mounting feet , for indoor usage.
  • Complete system includes a 20’ mechanical float switch
  • Alarm operates on 12 Volts, reducing the possibility of accidental electric shock.
  • Auxiliary contacts with common, normally open and normally closed terminals are available behind a panel, on the lower right side, held in place by two #1 Phillips head screws. The barrier terminal screws are Phillips/Standard slot combo head type.

  •  DOWNLOADS 

     width= STANCOR-STAND-ALONE-120-VOLT-ALARM-PAK-WITH-BATTERY
    (PDF, 400KB)


    Request Information
    Copyright © 2011 Stancor Pumps Inc., All Rights Reserved.Privacy  |  Sitemap  |  Site Created by ThomasNet Web Solutions and Powered by Navigator Platform